Install MongoDB Community Edition on macOS¶

On this page

Overview
Considerations
Install MongoDB Community Edition
Run MongoDB Community Edition
Using the MongoDB Database Tools
Additional Information

Important

MongoDB 5.3 binaries are currently available only as release candidates. Release candidates can be used for early testing of new features, but are not suitable for production deployments.

This version of the manual is for an upcoming release and is currently a work in progress.

Overview¶

Use this tutorial to install MongoDB 5.0 Community Edition on macOS using the third-party Homebrew package manager.

Starting with MongoDB 4.4.1, installing MongoDB via Homebrew also installs the :dbtools:`MongoDB Database Tools </>`. See Using the MongoDB Database Tools for more information.

MongoDB Version¶

This tutorial installs MongoDB 5.0 Community Edition. To install a different version of MongoDB Community, use the version drop-down menu in the upper-left corner of this page to select the documentation for that version.

Considerations¶

Platform Support¶

Note

EOL Notice

MongoDB 5.0 Community Edition removes support for macOS 10.13

MongoDB 5.0 Community Edition supports macOS 10.14 or later.

See prod-notes-supported-platforms for more information.

Production Notes¶

Before deploying MongoDB in a production environment, consider the Production Notes document which offers performance considerations and configuration recommendations for production MongoDB deployments.

Install MongoDB Community Edition¶

Prerequisites¶

Ensure your system meets each of the following prerequisites. You only need to perform each prerequisite step once on your system. If you have already performed the prerequisite steps as part of an earlier MongoDB installation using Homebrew, you can skip to the installation procedure.

Install Xcode Command-Line Tools¶

Homebrew requires the Xcode command-line tools from Apple’s Xcode.

Install the Xcode command-line tools by running the following command in your macOS Terminal:
copy
```
xcode-select --install
```

Install Homebrew¶

macOS does not include the Homebrew brew package by default.

Install brew using the official Homebrew installation instructions.

Installing MongoDB 5.0 Community Edition¶

Follow these steps to install MongoDB Community Edition using Homebrew’s brew package manager. Be sure that you have followed the installation prerequisites above before proceeding.

Tap the MongoDB Homebrew Tap to download the official Homebrew formula for MongoDB and the Database Tools, by running the following command in your macOS Terminal:
copy
```
brew tap mongodb/brew
```
If you have already done this for a previous installation of MongoDB, you can skip this step.
To update Homebrew and all existing formulae:
copy
```
brew update
```
To install MongoDB, run the following command in your macOS Terminal application:
copy
```
brew install mongodb-community@5.0
```

Tip

Alternatively, you can specify a previous version of MongoDB if desired. You can also maintain multiple versions of MongoDB side by side in this manner.

Tip

If you have previously installed an older version of the formula, you may encounter a ChecksumMismatchError. To resolve, see Troubleshooting ChecksumMismatchError.

The installation includes the following binaries:

The mongod server
The mongos sharded cluster query router
The MongoDB Shell, mongosh

In addition, the installation creates the following files and directories at the location specified below, depending on your Apple hardware:

	Intel Processor	Apple M1 Processor
configuration file	`/usr/local/etc/mongod.conf`	`/opt/homebrew/etc/mongod.conf`
`log directory`	`/usr/local/var/log/mongodb`	`/opt/homebrew/var/log/mongodb`
`data directory`	`/usr/local/var/mongodb`	`/opt/homebrew/var/mongodb`

See Apple’s documentation for the current list of Apple hardware using the M1 processor. You can also run the following command to check where brew has installed these files and directories:

copy

brew --prefix

Starting with MongoDB 4.4.1, the installation also includes the :dbtools:`MongoDB Database Tools </>`. See Using the MongoDB Database Tools for more information.

Run MongoDB Community Edition¶

Follow these steps to run MongoDB Community Edition. These instructions assume that you are using the default settings.

You can run MongoDB as a macOS service using brew, or you can run MongoDB manually as a background process. It is recommended to run MongoDB as a macOS service, as doing so sets the correct system ulimit values automatically (see ulimit settings for more information).

To run MongoDB (i.e. the mongod process) as a macOS service, run:
copy
```
brew services start mongodb-community@5.0
```
To stop a mongod running as a macOS service, use the following command as needed:
copy
```
brew services stop mongodb-community@5.0
```
To run MongoDB (i.e. the mongod process) manually as a background process, run:
- For macOS running Intel processors:
  copy
  mongod --config /usr/local/etc/mongod.conf --fork
- For macOS running on Apple M1 processors:
  copy
  mongod --config /opt/homebrew/etc/mongod.conf --fork
To stop a mongod running as a background process, connect to the mongod using mongosh, and issue the shutdown command as needed.

Both methods use the mongod.conf file created during the install. You can add your own MongoDB configuration options to this file as well.

Note

macOS Prevents mongod From Opening

macOS may prevent mongod from running after installation. If you receive a security error when starting mongod indicating that the developer could not be identified or verified, do the following to grant mongod access to run:

Open System Preferences
Select the Security and Privacy pane.
Under the General tab, click the button to the right of the message about mongod, labelled either Open Anyway or Allow Anyway depending on your version of macOS.

To verify that MongoDB is running, perform one of the following:

If you started MongoDB as a macOS service:
copy
```
brew services list
```
You should see the service mongodb-community listed as started.
If you started MongoDB manually as a background process:
copy
```
ps aux | grep -v grep | grep mongod
```
You should see your mongod process in the output.

You can also view the log file to see the current status of your mongod process: /usr/local/var/log/mongodb/mongo.log.

Connect and Use MongoDB¶

To begin using MongoDB, connect mongosh to the running instance. From a new terminal, issue the following:

copy

mongosh

Note

macOS Prevents mongosh From Opening

macOS may prevent mongosh from running after installation. If you receive a security error when starting mongosh indicating that the developer could not be identified or verified, do the following to grant mongosh access to run:

Open System Preferences
Select the Security and Privacy pane.
Under the General tab, click the button to the right of the message about mongosh, labelled either Open Anyway or Allow Anyway depending on your version of macOS.

For information on CRUD (Create,Read,Update,Delete) operations, see:

Using the MongoDB Database Tools¶

Starting in MongoDB 4.4.1, installing MongoDB via brew also installs the MongoDB Database Tools.

The :dbtools:`MongoDB Database Tools </>` are a collection of command-line utilities for working with a MongoDB deployment, including data backup and import/export tools like mongoimport and mongodump as well as monitoring tools like mongotop.

Once you have installed the MongoDB Server in the steps above, the Database Tools are available directly from the command line in your macOS Terminal application. For example you could run mongotop against your running MongoDB instance by invoking it in your macOS Terminal like so:

copy

mongotop

It should start up, connect to your running mongod, and start reporting usage statistics.

See the :dbtools:`MongoDB Database Tools Documentation</>` for usage information for each of the Database Tools.

Additional Information¶

Localhost Binding by Default¶

By default, MongoDB launches with bindIp set to 127.0.0.1, which binds to the localhost network interface. This means that the mongod can only accept connections from clients that are running on the same machine. Remote clients will not be able to connect to the mongod, and the mongod will not be able to initialize a replica set unless this value is set to a valid network interface.

This value can be configured either:

in the MongoDB configuration file with bindIp, or
via the command-line argument --bind_ip

Warning

Before binding to a non-localhost (e.g. publicly accessible) IP address, ensure you have secured your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.

For more information on configuring bindIp, see IP Binding.

Troubleshooting ChecksumMismatchError¶

If you have previously installed an older version of the formula, you may encounter a ChecksumMismatchError resembling the following:

Error: An exception occurred within a child process:

  ChecksumMismatchError: SHA256 mismatch

Expected: c7214ee7bda3cf9566e8776a8978706d9827c1b09017e17b66a5a4e0c0731e1f

  Actual: 6aa2e0c348e8abeec7931dced1f85d4bb161ef209c6af317fe530ea11bbac8f0

 Archive: /Users/kay/Library/Caches/Homebrew/downloads/a6696157a9852f392ec6323b4bb697b86312f0c345d390111bd51bb1cbd7e219--mongodb-macos-x86_64-4.2.0.tgz

To retry an incomplete download, remove the file above.

To fix:

Remove the downloaded .tgz archive.

Retap the formula.

copy

brew untap mongodb/brew && brew tap mongodb/brew

Retry the install.
copy
```
brew install mongodb-community@5.0
```

← Install MongoDB Community on Amazon Linux using .tgz Tarball Install MongoDB Community on macOS using .tgz Tarball →